ICE MotoTRBO TRS Decoding Project

A forum for discussion of the many trunked radio systems in and around our listening area.
Message
Author
User avatar
ecps92
Posts: 4787
Joined: 07 Dec 2005 19:26
Location: South Shore, MA
Contact:

Re: ICE MotoTRBO TRS Decoding Project

#151 Post by ecps92 » 28 Apr 2018 08:15

I would agree [per FCC] for Northfield
http://wireless2.fcc.gov/UlsApp/UlsSear ... =&x=8&y=12
jmarcel66 wrote:
27 Apr 2018 23:01
Site 38 appears active in NH on 935.4625 with the Control Channel in service at the moment. Strong signal in North Concord (Penacook), NH and may be in Northfield atop Highland Mountain. It is showing Site 38 with Color Code of 8.

John Marcel,
Penacook, NH
K1FDD/WPXA902

User avatar
garys
Posts: 3186
Joined: 29 Aug 2005 13:07

Re: ICE MotoTRBO TRS Decoding Project

#152 Post by garys » 26 Jul 2018 14:33

Is replying to my own post like talking to myself?

Anyway, after getting home from vacation, I cranked up the DSD+/SDR laptop and dialed in the control channel for Quincy. 935.4000 is back on line at full power. I guess that answers my question about how long it will take to get fixed.

I wonder if they were waiting for parts or if they just didn't realize until recently that one of the transmitters was transmitting at reduced power?
garys wrote:
22 Mar 2018 22:46
I went to East Milton Square this afternoon and set up my SDR/DSD+ rig. 935.4000 is on the air, but with greatly reduce power. Seems to be some sort of problem with the transmitter for that particular frequency.

I wonder how long it will take before it gets fixed?

User avatar
garys
Posts: 3186
Joined: 29 Aug 2005 13:07

Re: ICE MotoTRBO TRS Decoding Project

#153 Post by garys » 04 Dec 2018 21:15

I'm seeing several sites with the message "Con+ Network Repeater Map Broadcast; File Version = 02042018. It also shows the Channel # and duration of the broadcast.

On a guess, mobile units are being updated with new frequencies for existing sites or maybe new sites.

cdgordon
Posts: 1156
Joined: 29 Aug 2005 15:46
Location: Granby, CT

Re: ICE MotoTRBO TRS Decoding Project

#154 Post by cdgordon » 05 Dec 2018 00:26

Look in the DSDPlus folder for the file. Should be something like "ConP 171 Network Repeater Map"

chris

User avatar
garys
Posts: 3186
Joined: 29 Aug 2005 13:07

Re: ICE MotoTRBO TRS Decoding Project

#155 Post by garys » 05 Dec 2018 15:09

Sadly, not there. Which probably just means I don't have something set up properly. Too bad, it would likely have been helpful.

UPDATE: I deleted the VC.log file and restarted the program on the chance that it will be buried in there somewhere. As luck would have it, the site I was on started downloading the file right after that. It's been going on for about 40 minutes so far. I'm going to wait for the file transfer to end and then close DSD_VC. Maybe the file will be there in a readable format.
cdgordon wrote:
05 Dec 2018 00:26
Look in the DSDPlus folder for the file. Should be something like "ConP 171 Network Repeater Map"

chris

Post Reply