DMR won't Receive on NX3200

A forum for the discussion of APCO-2, DMR, NXDN, and any other type of digital radio systems in our monitoring area.
Post Reply
meia3
Posts: 2
Joined: 08 Dec 2020 19:06

DMR won't Receive on NX3200

Post by meia3 »

Hey all,

I'm trying to recieve Ellsworth, Maine Police on my NX3200. I have Ellsworth Fire Programmed in and it works fine but PD will not come through. Comes through fine on a scanner.

Frequency Info:
RX: 156.210
CC: 13
TG: 900
SL: 1

Anyone have any ideas?

User avatar
Scott
Site Administrator
Posts: 7708
Joined: 18 Aug 2005 12:00
Location: Cape Cod, Massachusetts
Contact:

Re: DMR won't Receive on NX3200

Post by Scott »

Our listing for Ellsworth ME Police indicates that the police is encrypted, so either it is incorrect or what you're hearing on your scanner is not Ellsworth, ME Police.

https://www.snewiki.com/wiki/index.php/ ... epartments
Scott
SNE Maintenance/Janitor/Fixer of "Things"

User avatar
schwab
Forums and Wiki Moderator
Posts: 620
Joined: 13 Apr 2010 11:16
Location: South Berwick, ME

Re: DMR won't Receive on NX3200

Post by schwab »

Is it possible the PD aren't encrypted, but are using RAS (Restricted Access to System)? From what I understand, RAS prohibits unauthorized DMR radios from transmitting or receiving the frequency, but scanners (and/or SDRs) can still receive it.
Jacob
KB1VLA

meia3
Posts: 2
Joined: 08 Dec 2020 19:06

Re: DMR won't Receive on NX3200

Post by meia3 »

Ellsworth PD is no longer Encrypted, it was before but now it is not. This is probably because fire wanted EPD in their radios and their radios would not support the Encryption.

Post Reply