Programming the BearCom RDC system via ARC536

[joekehoe]

I have programmed the above system in my BCD536 but haven’t heard any transmissions. What am I doing wrong? I have enabled the service types.

[W1KNE]

You have the DMR upgrade ?
If so, check your favorites list quick keys to make sure they are enabled.

[garys]

NXDN.

You have the DMR upgrade ?
If so, check your favorites list quick keys to make sure they are enabled.

[garys]

All of the sites? Are the channel numbers and RAN programmed?

I have programmed the above system in my BCD536 but haven’t heard any transmissions. What am I doing wrong? I have enabled the service types.

[joekehoe]

I have the Ran programmed but not the channel numbers. How do you find the channels. Thank you

[garys]

Everything you need is right here.

https://www.snewiki.com/wiki/index.php/ ... _RDC_Trunk

I have the Ran programmed but not the channel numbers. How do you find the channels. Thank you

[joekehoe]

Thank you

[garys]

You're welcome. Let us know if that works.

[W1KNE]

NXDN.

Thanks. So many of these commercial systems, easy to forget.

[garys]

I just didn't want Joe to be confused and reprogram the scanner with bad info.

Between DMR in all of its flavors and NXDN in all of its flavors it's hard to keep track. Not to mention IDAS.