Programming the BearCom RDC system via ARC536

Share your scanner programming files here! See the "sticky" post (top thread) in the forum for information how to post.
Post Reply
joekehoe
Posts: 80
Joined: 31 Aug 2005 09:56
Location: Plymouth

Programming the BearCom RDC system via ARC536

Post by joekehoe »

I have programmed the above system in my BCD536 but haven’t heard any transmissions. What am I doing wrong? I have enabled the service types.
User avatar
W1KNE
Owner-Webmaster
Posts: 5680
Joined: 19 Aug 2005 12:00
Location: Southern New England
Contact:

Re: Programming the BearCom RDC system via ARC536

Post by W1KNE »

You have the DMR upgrade ?
If so, check your favorites list quick keys to make sure they are enabled.
Mike Fitzpatrick
Broadcast Engineer - RF Enthusiast - Municipal Fire Alarm Collector
Owner: Scan New England - NECRAT.US
Issues with Scan New England can be privately addressed to me.
garys
Forums and Wiki Moderator
Posts: 4396
Joined: 29 Aug 2005 13:07

Re: Programming the BearCom RDC system via ARC536

Post by garys »

NXDN.

W1KNE wrote: 04 Feb 2022 13:18 You have the DMR upgrade ?
If so, check your favorites list quick keys to make sure they are enabled.
We're peace loving people, we're not hunting trouble, but if trouble should find us, we'll stand up and fight.
garys
Forums and Wiki Moderator
Posts: 4396
Joined: 29 Aug 2005 13:07

Re: Programming the BearCom RDC system via ARC536

Post by garys »

All of the sites? Are the channel numbers and RAN programmed?

joekehoe wrote: 04 Feb 2022 11:23 I have programmed the above system in my BCD536 but haven’t heard any transmissions. What am I doing wrong? I have enabled the service types.
We're peace loving people, we're not hunting trouble, but if trouble should find us, we'll stand up and fight.
joekehoe
Posts: 80
Joined: 31 Aug 2005 09:56
Location: Plymouth

Re: Programming the BearCom RDC system via ARC536

Post by joekehoe »

I have the Ran programmed but not the channel numbers. How do you find the channels. Thank you
garys
Forums and Wiki Moderator
Posts: 4396
Joined: 29 Aug 2005 13:07

Re: Programming the BearCom RDC system via ARC536

Post by garys »

Everything you need is right here.

https://www.snewiki.com/wiki/index.php/ ... _RDC_Trunk
joekehoe wrote: 04 Feb 2022 16:21 I have the Ran programmed but not the channel numbers. How do you find the channels. Thank you
We're peace loving people, we're not hunting trouble, but if trouble should find us, we'll stand up and fight.
joekehoe
Posts: 80
Joined: 31 Aug 2005 09:56
Location: Plymouth

Re: Programming the BearCom RDC system via ARC536

Post by joekehoe »

Thank you
garys
Forums and Wiki Moderator
Posts: 4396
Joined: 29 Aug 2005 13:07

Re: Programming the BearCom RDC system via ARC536

Post by garys »

You're welcome. Let us know if that works.
We're peace loving people, we're not hunting trouble, but if trouble should find us, we'll stand up and fight.
User avatar
W1KNE
Owner-Webmaster
Posts: 5680
Joined: 19 Aug 2005 12:00
Location: Southern New England
Contact:

Re: Programming the BearCom RDC system via ARC536

Post by W1KNE »

garys wrote: 04 Feb 2022 13:53NXDN.
Thanks. So many of these commercial systems, easy to forget.
Mike Fitzpatrick
Broadcast Engineer - RF Enthusiast - Municipal Fire Alarm Collector
Owner: Scan New England - NECRAT.US
Issues with Scan New England can be privately addressed to me.
garys
Forums and Wiki Moderator
Posts: 4396
Joined: 29 Aug 2005 13:07

Re: Programming the BearCom RDC system via ARC536

Post by garys »

I just didn't want Joe to be confused and reprogram the scanner with bad info.

Between DMR in all of its flavors and NXDN in all of its flavors it's hard to keep track. Not to mention IDAS.
We're peace loving people, we're not hunting trouble, but if trouble should find us, we'll stand up and fight.
Post Reply